Knowledgebase: Phone System
How to register a Mitel 5302 phone
Updated: 28 June 2018 03:12 PM

You can register the Mitel 5302 phone by following the steps below:


  1. Log on to the 3300 in the normal way. 
  2. At the top left of the MCD screen select View Alphabetically from the dropdown
  3. Click the Users and Devices Configuration form and create an Extn Account( for 5302s you do not need to enter mac address in device details )
  4. Connect the Ethernet cable to the phone
  5. Let the phone boot up
  6. Leave the Handset off the hook and to the side of the phone
  7. Hold the * key down until all 3 light are flashing (Will start flashing individually, then all 3 solid and finally all 3 flashing)
  8. Now press #
  9. Enter the ext number e.g 7001(The number you enter will be your own extension)
  10. Press #
  11. Enter User PIN (this is the phone registering PIN that usually is the same as extension)
  12. Press #
  13. The lights should go out and it can take a few minutes for the dial tone to come through.